Expert Answers about Chrysler Hitch Pins and Clips
- Does the Curt Hitch C11264 for a Nissan Maxima Come with Pin and Clip
- The Curt Class 1 Hitch # C11264 which is a fit for a 2005 Nissan Maxima I can confirm does not come with a hitch pin and clip. That said, we do sell this separately using the Pin and Clip For Class I and II Trailer Hitch Receiver Hitch part # PC2. The pin and clip is usually included with the accessory but very rarely if ever included with the trailer hitch.
I have attached a list of some hitch mounted accessories you may be interested in as well below
view full answer... - Is Entire Hitch Pin & Clip For 2" Hitches TMX28VR Stainless Steel
- Hi Marty; yes, the pin and clip and entirety of the Trimax Trailer Hitch Pin with Flip-Tip for 2" Hitches # TMX28VR is stainless steel.
You made a nice choice going with the # TMX28VR as its complete stainless steel construction will give you the best possible resistance against corrosion.
view full answer... - Will the Gen-Y Hitch Pin and Clip for 2" Hitches 325-GH-096 Work w/ Class IV and V Hitches?
- Yes, it is! The Gen-Y Hitch Pin and Clip for 2" Hitches item # 325-GH-096 will work with all 2" receiver hitches and is rated for the extra weight of a class IV or V hitch.
view full answer... - Will the Curt Hitch Pin and Clip Work To Attach a Rear Cargo Trailer Basket
- The # C21410 Curt Hitch Pin and Clip will work for your rear cargo trailer basket as long as you have a 1-1/4" hitch. This hitch pin is designed for 1-1/4" hitches and has a 1/2" diameter with a 2" span. This works for Class I and Class II hitches. If you need one for a 2" hitch you can use the # C21510 instead.
I have attached a review video for your reference.
view full answer... - Replacement Safety Pins for Roadmaster Jeep D-Rings
- I checked with Roadmaster and the Replacement Safety Pins for Roadmaster Falcon and Eagle 8000 Tow Bars item # RM-910026 is what's used to secure the Hitch Pin for Roadmaster Jeep D-Ring Bumper Mount Tow Bar Adapters item # RM-910044. They use it on quite a few of their adapters, tow bars, and base plates.
view full answer... - Trailer Hitch Ball Mount and Hitch Balls for 2010 Cadillac CTS
- For the Draw Tite hitch part # 24767 that is a fit for your 2010 Cadillac CTS the ball mount you would want is the part # 3594 which comes with a pin and clip.
For a ball you would want the part # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch ball.
view full answer... - Will the Softride Dura Folding Bike Rack fit a Curt # 13354 Hitch on a 2007 Acura MDX
- The Softride Dura, part # SR26247 will fit the Curt Hitch, part # 13354 just fine. You will need to take one measurement however, to make sure the bike rack comes out far enough to clear the bumper.
Measure from the hitch pin hole, straight out to the furthest point of the bumper. As long as this measurement is 6 inches or less, the bike rack will fit.
At the bottom of the Dura page, you will see a few dimensional diagrams that will help you get an idea of how it will fit on your MDX....
view full answer... - Recommended Wiring Harness and Hitch for a 2012 BMW X5
- It does not. The Hidden Hitch by Draw-Tite item # DT36GR is just the trailer hitch. To add wiring to your 2012 BMW X5 you will need the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item # 119250KIT.
To round out your towing setup, I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip,...
view full answer... - Can Hitch Ball Size Be Changed Out on Curt Euro Style Ball Mount
- Thanks for reaching out, John!
The Curt Class II Euro Style Drawbar # C45552 has a 2" hitch ball. The hitch ball is fixed and can't be removed so if you want this style and you need to be able to use both a 1-7/8" and 2" hitch ball you'll need to also get the part # C45551 so you have 2 different ball mounts.
For an alternative solution I recommend pairing the Curt Class II Drawbar # C45521 with the Convert-A-Ball Interchangeable Ball Set # 802b which gives you a way to swap out the hitch...
view full answer... - Recommended 7-Way Connector for a 2024 Subaru Forester w/ a 4-Way Connector
- Congrats on the new car! To add a 7-Way connector to a 2024 Subaru Forester, I recommend the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your Subaru with an included bracket. This kit is designed for use on a vehicle like your daughters with an existing 4-way flat trailer connector and plugs directly into it.
Your daughter is also going to need a brake controller to...
view full answer... - Will CURT Trailer Hitch # C13050 Fit a 2008 Cadillac SRX with Sports Package
- According to our contacts at CURT, trailer hitch # C13050, will fit on the 2008 Cadillac SRX if it has the Sports Package. None of the other hitches we carry are designed to work with the fascia that comes on the sports package models. I have included a link to the installation details for you to view.
There is no template available for trimming the fascia. The spare tire will need to just be lowered to install the hitch and raised again after installation. The hitch should not interfere...
view full answer... - Is There a Class II, 1-1/4 Trailer Hitch For 2024 Kia Sportage
- Thanks for the question Geoff, and there is not actually a Class II, 1-1/4" trailer hitch for your 2024 Kia Sportage, just 2" hitches. That said, if you want a 1-1/4" hitch because you have an accessory like a bike rack that fits a 1-1/4" hitch, there's a solution for that with a hitch reducer:
- Trailer Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # e63YR
This will allow you to use an accessory with a 1-1/4" shank in a 2" hitch, and it even comes with a pin and clip to mount in...
view full answer... - Using 1-1/4 Bike Rack With 2 Inch Stealth Hitches Receiver on Volvo V60
- Hey there Rick, there is a way to use your 1-1/4" Kuat Sherpa 2.0 # SH12G with the 2" receiver that comes with the Stealth Hitches Hidden Rack Receiver # SH47FR.
What you would need to do is simply use an adapter, the Hitch Reducer 2" to 1-1/4" # HT02.
This will go in the 2" receiver and essentially turn it into a 1-1/4" receiver. It comes with a 1-1/4" pin and clip, though you won't be using that for your Sherpa so you can disregard it. The only thing you would need is something to secure...
view full answer... - Recommended 7-Way Wiring Harness for a 2013 Chrysler Town and Country
- The Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter item # 22121 will definitely work on your 2013 Town and Country. This is by far the easiest way to add a 7-way connector to your Chrysler. I have linked the installation instructions below.
The Tekonsha Voyager item # 39510 and the Tekonsha Prodigy P3 item # 90195 are two different brake controllers but both will plug into the adapter that is included with the item # 22121 harness. The P3 is a top of the line...
view full answer... - How to Remove and Install the Spring Clip for a Fastway e2 WDS
- Brent, to remove the Replacement Spring-Bar Release Clip for Fastway e2 Weight Distribution Systems with Round Bars # FA94-02-1059 you are going to need to start by getting the lower screw out of the clip which you're going to need to pry out since there isn't a proper screw head to it.
Once the screw is out on both sides, you should be able to slide the clip down so it passes through the hole and pry out the top pin. When you go to install the new one, you'll need to repeat this process...
view full answer... - Recommended Hitch and Wiring Harness for a 2024 Toyota Grand Highlander
- To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item # C26VV. This hitch is custom fit and bolts to your Toyota with included hardware.
The Curt item # C26VV is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I really like this hitch because the entire crosstube mounts behind the rear bumper leaving only the 2" receiver visible. This not only looks better but helps with ground clearance.
To...
view full answer... - Is There a Hitch for a 2024 Mazda CX-90?
- Yes, we do have a hitch for the 2024 Mazda CX-90. It is the Curt item # C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight.
I really like this hitch because the entire crosstube mounts behind the rear bumper. This leaves only the 2" receiver exposed which not only looks better but helps with ground clearance.
The Curt T-Connector Vehicle Wiring...
view full answer... - Hardware Installation Questions for a EcoHitch on a 2021 Subaru WRX
- I went ahead and linked an installation video for the EcoHitch Invisi Trailer Hitch Receiver item # 306-X7257 on a 2019 Subaru WRX. These are the same steps as your 2021 WRX. You will see around the 16:10-16:50 part of the video that the bolts are pushed up against the frame to hold them in place while the washers, lock washer, and hex nut are tightened and then later torqued on. The hardware for this hitch uses standard bolts not carriage bolts so they do not come with a square beneath...
view full answer... - Will Brophy Ball Mount BM20 Allow Rear Hatch to Open
- Yes, the rear hatch on your Ford Explorer will still be able to open when using the Brophy Ball Mount for 2" Hitches # BM20.
You wouldn't need sway bars due to the longer ball mount so you're set there. You'd only need a hitch ball, either 2" hitch ball # C54CR or 2-5/16" hitch ball # C40005 depending on your trailer coupler.
Then to secure the ball mount use pin and clip # C21504 or hitch lock # e98881.
view full answer... - Class III Ball Mount With a 4" Rise and 2" Trailer Hitch Ball
- While the ball on the Curt Class III Ball Mount # C45056 can also be used in a rise position it will only give you 2" of rise. Instead you would want the Curt Ball Mount # C45070, a 2" Ball # 40038 and a Pin and Clip # C21500 for a 4" rise. You will want to check the hitch ball to verify the torque spec but it currently is 250ft-lbs as we are not able to install the ball for you at our facility.
view full answer...
Go To Results